Dash2 and windows10 *pulling my hair out*
Posted: Tue Mar 03, 2020 12:39 pm
Hi there...
Firstly, please take it easy with me.. I'm not computer savvy so really will talking through this in baby steps!!
I'm trying to change a few things on my dash2 display
I've tried a generic serial to USB adapter with no joy..
I got the
"Sending hardware identity message"
The green bar started..
Then an error window saying
"System failed to continue read configuration"
The dash was refreshed by the mapper and is now on 10.0 (turning on and holding the down button)
I've since ordered the RaceTechnology adapter..
But need to know a few things..
1- what driver do I need for windows10??
2- should I be using V8.5 or V10 software??
3- what else should I be doing??
I'm REALLY struggling here and could do with some help..
Thanks in advance
Stu
Firstly, please take it easy with me.. I'm not computer savvy so really will talking through this in baby steps!!
I'm trying to change a few things on my dash2 display
I've tried a generic serial to USB adapter with no joy..
I got the
"Sending hardware identity message"
The green bar started..
Then an error window saying
"System failed to continue read configuration"
The dash was refreshed by the mapper and is now on 10.0 (turning on and holding the down button)
I've since ordered the RaceTechnology adapter..
But need to know a few things..
1- what driver do I need for windows10??
2- should I be using V8.5 or V10 software??
3- what else should I be doing??
I'm REALLY struggling here and could do with some help..
Thanks in advance
Stu