Hi Guys
I hope someone can point me in the right direction.
Whilst on track I started logging with "Menu" + "Up"... then on a slow lap I wanted to set a track marker for the start/finish line.
I was expecting to press menu -> perform action -> Add Marker... however as soon as I pressed the menu button I got an error message saying "vehicle moving"... have I missed a tick box in the setup to allow changes to be made whilst in motion?
Many thanks
Slimat
Dash 2 Pro - menu button; "vehicle is moving"
-
- Posts: 17
- Joined: Thu Jul 26, 2018 7:01 am
Re: Dash 2 Pro - menu button; "vehicle is moving"
Hello Slimat,
Not possible to access DASH2 PRO menu whilst vehicle in motion, done to promote safe driving. Button functions can be changed in the DASH2 PRO configuration utility in User Control Inputs. For example, change Set / Select button function to Add Marker.
Not possible to access DASH2 PRO menu whilst vehicle in motion, done to promote safe driving. Button functions can be changed in the DASH2 PRO configuration utility in User Control Inputs. For example, change Set / Select button function to Add Marker.
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 17 guests