DL1 Pro not logging at 1Khz only at 100Hz
Posted: Wed Jun 08, 2022 9:07 pm
Hi,
My DL1 Pro was purchased with the 6g accerometers and the 1KHz logging options. Although I configured it to collect the analog channels at 1Khz it only logged at 100Hz. When I tried to export the CSV file at 1KHz I got each 10ms reading repeated 10 times.
Is there an option in the config setup to ensure the 1KHz logging rate?
Thanks,
Jeff
My DL1 Pro was purchased with the 6g accerometers and the 1KHz logging options. Although I configured it to collect the analog channels at 1Khz it only logged at 100Hz. When I tried to export the CSV file at 1KHz I got each 10ms reading repeated 10 times.
Is there an option in the config setup to ensure the 1KHz logging rate?
Thanks,
Jeff