I am trying to figure out how to turn on my Chasecam video recorder together when I press the DL1 start button. could I use the Log Status output to do this?
2.5 mm jack or 5 pin mini-din connectors is used:
Pin of jack / minidin Signal Description
1 R / 1 +Vdc +5...8 volt, depending on model and battery used
3 Switch Connect Pin 3 to GND for >140 ms to power on/off
2 CTL
http://pinouts.ru/Home/sony_lanc_pinout.shtml
LANC Control Output
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 122 guests