Extending the Dash1 cable

chumpy36
Posts: 36
Joined: Sun Dec 11, 2005 2:26 am

Extending the Dash1 cable

Postby chumpy36 » Wed Apr 11, 2007 1:12 pm

I need more length on the cable. I tried a normal serial cable (or at least the one that came with my DL90) and some gender changing adapters. This apparently won't work.

Anyone know of other options? The pinouts etc?

Support?


thanks

Jason

jlucas
Posts: 302
Joined: Tue Nov 29, 2005 12:45 am
Location: East Liberty, OH
Contact:

Postby jlucas » Thu Apr 12, 2007 12:02 am

e-help file has all your answers
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer

svtdoug
Posts: 16
Joined: Fri Mar 23, 2007 6:31 am
Location: Gig Harbor, WA

Postby svtdoug » Sat May 05, 2007 8:18 am

I would also like to extend the cable on my Dash1. What are the e-help files you refer to? I checked the Analysis software help and found nothing.

Thanks,

Doug
'18 Shelby GT350 - Leadfoot Gray

jlucas
Posts: 302
Joined: Tue Nov 29, 2005 12:45 am
Location: East Liberty, OH
Contact:

Postby jlucas » Sat May 05, 2007 12:23 pm

svtdoug wrote:I checked the Analysis software help and found nothing.

The Pinouts are located in the e-help under Help Contents - Hardware - DL1- Connections.
Longer cables just need to be of the straight through type.
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer

RTUSA
Site Admin
Posts: 457
Joined: Fri Feb 24, 2006 7:34 pm
Location: Richmond, VA, USA

Postby RTUSA » Mon May 07, 2007 1:34 pm

Thanks Jeremy.

Generally, any serial cable EXTENSION needs to be of the straight through type. Our supplied serial cables are of the null modem type, and thus won't work as extenders.
Al Seim
Race Technology USA

_MichaelB_
Posts: 1
Joined: Thu Aug 14, 2008 10:13 am

Re: Extending the Dash1 cable

Postby _MichaelB_ » Thu Aug 14, 2008 10:17 am

chumpy36 wrote:I need more length on the cable. I tried a normal serial cable (or at least the one that came with my DL90) and some gender changing adapters. This apparently won't work.

Anyone know of other options? The pinouts etc?

Support?


thanks

Jason


is it possible to use the DL-90 with Dash1 ?
Can i use DL-90 with dash 2 ?


//Michael

DavidRowley
Posts: 43
Joined: Fri Mar 28, 2008 8:01 pm
Location: westmidlands
Contact:

Postby DavidRowley » Sat Aug 16, 2008 8:09 pm

no michael DL90 is not compatable with Dash 1 or Dash two for serial data how ever you can install a dash 2 and use it stand alone.


Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 20 guests