have tried to reflash. Keep getting same answer: "The Device Not Responding Correctly, Please check It It Connected Correctly"....
Checked Port it says it's working properly...
Help
DL1 Troubles
First, are you using the reflash utility from a fairly recent Analysis installation? Until mid 2006 the utility was very hard to use, the timing of powering up the DL1 was quite critical. The newer utility is quite easy. Analysis can be downloaded from the Software section of our website.
Second, are you using the supplied serial cable? If not, any null modem cable will work, please note that there are at least 3 kinds of serial cables available.
Third, does your PC have a serial port or are you using a USB adapter? Those usually get a highish port number (mine is on 5)
Hope that helps,
Second, are you using the supplied serial cable? If not, any null modem cable will work, please note that there are at least 3 kinds of serial cables available.
Third, does your PC have a serial port or are you using a USB adapter? Those usually get a highish port number (mine is on 5)
Hope that helps,
Al Seim
Race Technology USA
Race Technology USA
DL1 Problems
(1) tried two different null modem cables - usb to serial - port was 4 -xp Laptop. Serial to serial - port ?? xp PC. Old laptop 2000 serial to serial - same results... I'm using version 6 software even tried old version... I'd try My other unit but that one is working and I don't want anything to happen to it..
DL1 Problems
I Think I'm using latest versions of software ?
BuildCode: Car/DL1/6.3.119
Reflash.exe - file 2.1.0.1
If this helps ??
Charlie
BuildCode: Car/DL1/6.3.119
Reflash.exe - file 2.1.0.1
If this helps ??
Charlie
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 276 guests