Can I have the wiring diagram for the GoPro lead please. I already have a charging box for my GoPro and I would like to make a new lead to charge the Gopro, as well as using the DL1 to auto-start.
Thanks Andrew
GoPro Wiring for DL1
GoPro
Hello,
Do you mean the connection numbers inside the GoPro connector?
http://www.race-technology.com/wiki/ind ... rfaceCable
What is the charging box you have? We are thinking about integrating this into the DL1.
Kind regards,
Support (K)
Do you mean the connection numbers inside the GoPro connector?
http://www.race-technology.com/wiki/ind ... rfaceCable
What is the charging box you have? We are thinking about integrating this into the DL1.
Kind regards,
Support (K)
Hi
Yes the connection numbers inside the GoPro. I usually short pin 12 to pin 1 (gnd) for remote start, but I didn't know if your lead was wired differently.
The remote start/stop and charging box is one I made. I use a 12v - 5v converter from a radio control model shop, with an isolation switch and a LED.
Regards Andrew
Yes the connection numbers inside the GoPro. I usually short pin 12 to pin 1 (gnd) for remote start, but I didn't know if your lead was wired differently.
The remote start/stop and charging box is one I made. I use a 12v - 5v converter from a radio control model shop, with an isolation switch and a LED.
Regards Andrew
GoPro Wiring for DL1
hi Athos, we need to produce release 101 for Linux, but I donґt have a Linux machine, can you make it from the github repo?
Return to “Installation questions”
Who is online
Users browsing this forum: No registered users and 21 guests