i havent yet connected the 4 buttons to my DL1 dash two but i canr get the DL to logg unless i unplug the Dash 2 and press log button on the front then plug the Dash 2 Rs232 into the DL1 and the Tick appears and im logging and speed from Gps and REv from DL1 appear am i doing sumthing wrong or do i need to assign a button on the Dash 2 to start logger in which case i mis read the instructions
im waiting on a gotech dash plate before soldering the cables up into a loom so. any advance information would be helpfull
DL1 and Dash 2 starting log
-
- Posts: 43
- Joined: Fri Mar 28, 2008 8:01 pm
- Location: westmidlands
- Contact:
-
- Posts: 43
- Joined: Fri Mar 28, 2008 8:01 pm
- Location: westmidlands
- Contact:
-
- Posts: 43
- Joined: Fri Mar 28, 2008 8:01 pm
- Location: westmidlands
- Contact:
Current Version from software is 7-2 serial.618 whats latest version numbers please
need the New est Hex file for my DL1 please my dash2 wont start stop logging when connected to the DL1 if i start logging then power up the Dash everything is fine. i belive martin said i need the latest Version of the file
thexman@blueyonder.co.uk
Please
thanks in antispation
need the New est Hex file for my DL1 please my dash2 wont start stop logging when connected to the DL1 if i start logging then power up the Dash everything is fine. i belive martin said i need the latest Version of the file
thexman@blueyonder.co.uk
Please
thanks in antispation
Return to “Installation questions”
Who is online
Users browsing this forum: No registered users and 6 guests