all shift lights flashing

asentaja
Posts: 4
Joined: Fri May 01, 2009 2:37 pm
Location: fi

all shift lights flashing

Postby asentaja » Fri May 01, 2009 2:45 pm

Problem.. Installed new (paired) dash2+dl1
Everything seems to work correctly, except all shiftlights flash rapidly all time and no rpm reading, no gear indicator, gps speed works and all other sensor inputs from dl1 works too.
With lite monitor, i can get rpm out of dl1, so i think there is something wrong with dash, not dl1. I reflashed dash, but still all leds flashes. Dash settings are ok for dl1 speed and rpm. Gear settings are ok too.

They all worked fine at first start, problem started when i first time set new settings for dash (or when i started dash with down-button pressed to see version number) . But now cant get it sorted, tried everything..
Last edited by asentaja on Fri May 01, 2009 6:22 pm, edited 2 times in total.

osborni
Posts: 497
Joined: Fri Dec 07, 2007 9:08 pm
Location: USA, Michigan

Postby osborni » Fri May 01, 2009 3:44 pm

In the Dash2 menu structure, is the RPM set to RS232 Yes or No and what is Dash2 RPM set to, Yes or No?
BMW 2000 M Coupe

asentaja
Posts: 4
Joined: Fri May 01, 2009 2:37 pm
Location: fi

Postby asentaja » Fri May 01, 2009 6:20 pm

dash2 rpm is set to no, dash2 speed is set to no, rs232 rpm and speed are yes. Tried other settings too, but these should be correct ones.

Adam37tr
Posts: 98
Joined: Sun Oct 05, 2008 2:39 pm

Postby Adam37tr » Fri May 01, 2009 6:50 pm

In the dash2 display config the rpm setup bit

Set the rpm shift light to say 6000rpm :wink:

asentaja
Posts: 4
Joined: Fri May 01, 2009 2:37 pm
Location: fi

Postby asentaja » Fri May 01, 2009 8:18 pm

Adam37tr wrote:In the dash2 display config the rpm setup bit

Set the rpm shift light to say 6000rpm :wink:


hmm, worth trying. Could it be so simple.. :shock:

Adam37tr
Posts: 98
Joined: Sun Oct 05, 2008 2:39 pm

Postby Adam37tr » Sat May 02, 2009 6:40 am

Was on mine mate :oops:

Just cant get the ecu serial interface to do anything now

asentaja
Posts: 4
Joined: Fri May 01, 2009 2:37 pm
Location: fi

Postby asentaja » Sat May 02, 2009 6:28 pm

Adam37tr wrote:Was on mine mate :oops:


thanks! Problem solved.. 8)

shiftlight was set to 0 and pulses per revolution to 0,1
Everything works now when i put correct values..


Return to “Installation questions”

Who is online

Users browsing this forum: No registered users and 27 guests