Dash2 Wheel speed - maxing to 12,000 pulses
Posted: Wed Jul 15, 2009 7:02 pm
If you have problem in wheel speed maxing out @ 12000 pulses in the dash2, the only solution is to attach a pulse divider.
http://www.centrodyne.com/other1page15Ma.htm The unit is very small, half the size of a cigarette pack. Simple connection. There are 4 wires. red (12V) Black (grn) Green input to VSS (vehicle speed sensor) & the white (goes to dash2) 8 N wheel speed input (brown wire).
There is a jumper switch inside the pulse divider unit to divide using 1 2 4 8 & 16.
Ex...If you put the switch to 4 (divide into 4), the 12,000 pulses entered in the dash2 should only be 3,000 pulses.
This unit can also be used to any Honda, Nissan, Toyota with VSS (vehicle speed sensor) build in the tail of the transmission (used for anti-lock brakes).
The unit works and very cheap $31.00 US dollar (approx 21.95 Euro).
I hope this info helps.
http://www.centrodyne.com/other1page15Ma.htm The unit is very small, half the size of a cigarette pack. Simple connection. There are 4 wires. red (12V) Black (grn) Green input to VSS (vehicle speed sensor) & the white (goes to dash2) 8 N wheel speed input (brown wire).
There is a jumper switch inside the pulse divider unit to divide using 1 2 4 8 & 16.
Ex...If you put the switch to 4 (divide into 4), the 12,000 pulses entered in the dash2 should only be 3,000 pulses.
This unit can also be used to any Honda, Nissan, Toyota with VSS (vehicle speed sensor) build in the tail of the transmission (used for anti-lock brakes).
The unit works and very cheap $31.00 US dollar (approx 21.95 Euro).
I hope this info helps.