Hi,
I have started a new project to get a DL1 and Dash2 connected to a Motec M800 on my MINI JCW. I have purchased the ECU serial adapter and Dash2 and connected everything.
The Dash2 is new, but the DL1 is one that I have had lying around for a couple of years. It is a Mark 1 (later edition with green 2-piece rear connectors). it does not want to store its setup file. I opened the unit and checked the internal battery and it only measures 0.15V instead of 3V. This is probably the problem, now MY problem is how does one change it? It seems to be welded to its contacts and the only way to get it out is to unsolder the contacts from the PCB. This I can do, but there is nothing I can get in South Africa to replace it. Does this have to go back to RT?
DL1 Internal Battery
-
- Posts: 82
- Joined: Wed Nov 29, 2006 10:36 pm
- Location: South Africa
- Contact:
DL1 Internal Battery
Regards,
Gary...
Johannesburg
South Africa
Gary...
Johannesburg
South Africa
-
- Posts: 82
- Joined: Wed Nov 29, 2006 10:36 pm
- Location: South Africa
- Contact:
Return to “Installation questions”
Who is online
Users browsing this forum: No registered users and 13 guests