RPM Feed from Radical SR4 Kawasaki Carbs
Posted: Fri Mar 26, 2010 2:36 pm
Hi,
I believe I can take the RPM feed from the coil +ve side and run it into the low level input on the DL 1 ?
I am a novice at this sort of thing so does this sound correct ? I am guessing the other input on the DL1 would then need to be to an earth ?
Any pointers greatfully received.
Thanks
I believe I can take the RPM feed from the coil +ve side and run it into the low level input on the DL 1 ?
I am a novice at this sort of thing so does this sound correct ? I am guessing the other input on the DL1 would then need to be to an earth ?
Any pointers greatfully received.
Thanks