None of my buttons are responding on my Dash2. This is a new install. Currently I have Conn2 Power/Gnd connected. along with the 4 buttons and the common.
Conn1 = Pwr/Gnd.
Am I missing something?
Dash 2 Buttons
From these pinouts:
http://www.race-technology.com/wiki/ind ... stallation
Conn-2
Pin 5 > button 1 > pin 2 - Select button
Pin 8 > button 2 > pin 2 - Down button
Pin 13 > button 3 > pin 2 - Up button
Pin 14 > button 4 > pin 2 - Menu button
Pin 2 is the switch common.
make sure you don't have any solder bridges or carbon fragments, etc.
http://www.race-technology.com/wiki/ind ... stallation
Conn-2
Pin 5 > button 1 > pin 2 - Select button
Pin 8 > button 2 > pin 2 - Down button
Pin 13 > button 3 > pin 2 - Up button
Pin 14 > button 4 > pin 2 - Menu button
Pin 2 is the switch common.
make sure you don't have any solder bridges or carbon fragments, etc.
BMW 2000 M Coupe
-
- Posts: 10
- Joined: Fri Sep 02, 2011 2:56 am
-
- Posts: 10
- Joined: Fri Sep 02, 2011 2:56 am
Return to “Installation questions”
Who is online
Users browsing this forum: No registered users and 15 guests