Hi guys
We've small problem on side of the AFR(Lambda)..
We are running Syvecs S6 PnP ECU connected via RT CAN to the DASH2,here is our problem
AFR staying at 14.5 for while/staying at 14.5,but AEM UEGO external wideband showing all data(under throttle AEM showing 11.1-12.2,but on the DASH2 showing still same 14.5,sometimes working perfectly,but sometimes just staying at 14.5 for few miles without the changing),what I've read this can be problem on side of refresh/update rate
Can someone tell me how to increase update/refresh rate via Lite monitor or CAN software which is included in the Race technology v8 software
Sorry for my english
Thanks for any help,Jura
AFR(Lambda) Update/Refresh rate
Re: Support
Support wrote:Hello,
The AFR is set to come out the CAN interface with the default syves ECU configuration at 10Hz. I can send you a new configuration to it set to 100Hz to see if it makes any difference.
please email me and i will reply with the configuration.
kieran@race....
BR,
K
Kieran thanks for 100hz AFR and now working like charm
Thanks,Jura
Return to “Installation questions”
Who is online
Users browsing this forum: No registered users and 16 guests