Dash4PRO without an ECU

Snowball_161
Posts: 2
Joined: Tue Jul 23, 2013 8:19 pm

Dash4PRO without an ECU

Postby Snowball_161 » Thu Jul 25, 2013 7:34 am

I have a VW buggy. A very nice street machine.

It has a aircooled carburated engine with a classic distributor.
No ECU, CAN-bus etc...

At this time the car has no intruments at all.

I want to build a Dash4PRO in my car in the steering wheel.

What I want to monitor
- Engine RPM (from the negative terminal of the ignition coil)
- Wheel speed
- Oil pressure (I want to program a warning when pressure is to low)
- Oil temperature
- Generator (the generator en cooling fan are on the same axle, no generator, no engine cooling...)
- Fuel level

What do I need?
I think I can make it at least work with a DL1 club, because I want a wheel speed sensor. The outputs form the DL1 can I use to monitor on the Dash4PRO.

Am I right?

With kind regards,
Keith van der Zwan
@ The Netherlands

Support

Postby Support » Thu Jul 25, 2013 9:35 am

Good morning!

You are absolutely correct - best option is a DL1club and DASH4PRO. We do a package of these 2 products together - call the office for more information.

Kind Regards, Race Technology (Andy)

racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Postby racetec » Thu Jul 25, 2013 9:57 am

Hello,

To add to this, you will need to contact our distributor for your region if you wish to purchase this package deal. Please email us on our sales email address and your message will be forwarded on your behalf.

Thank you!

RT Sales.

Snowball_161
Posts: 2
Joined: Tue Jul 23, 2013 8:19 pm

Postby Snowball_161 » Thu Jul 25, 2013 3:52 pm

Ok thank you for the support!

I'm going to make a list of the parts I need and email it to the sales email adress.


Return to “Installation questions”

Who is online

Users browsing this forum: No registered users and 31 guests