Dash2 linked to omex 600

marc thomas
Posts: 2
Joined: Tue Dec 05, 2017 1:21 pm

Dash2 linked to omex 600

Postby marc thomas » Tue Dec 05, 2017 8:09 pm

Hi sorry if this has been asked 1000 times

How do I link the dash to my omex ecu ?
What sensors does the dash need to run ? Vehicle speed? Engine speed? Coolest temp? Or can they all be read through ecu ?

Cheers Marc

racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Re: Dash2 linked to omex 600

Postby racetec » Wed Dec 06, 2017 9:19 am

Hi

You will need our ECU interface to allow the Omex ECU to communicate with the DASH2:
https://www.race-technology.com/gb/raci ... interfaces

Please see our knowledge base page to see the channels available from the ECU via the interface:
https://www.race-technology.com/wiki/in ... X600And710

I hope this helps.

Adele

marc thomas
Posts: 2
Joined: Tue Dec 05, 2017 1:21 pm

Re: Dash2 linked to omex 600

Postby marc thomas » Wed Dec 06, 2017 10:22 am

Many thanks

Are these available to buy online ?

racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Re: Dash2 linked to omex 600

Postby racetec » Wed Dec 06, 2017 10:25 am

Yes, these can be bought from the Race Technology website (see first link above) or by calling us on 01773 537620.


Return to “Installation questions”

Who is online

Users browsing this forum: No registered users and 21 guests