Universal ODBII Interface red light flashing.

Chippy
Posts: 1
Joined: Thu Jul 12, 2018 6:53 pm

Universal ODBII Interface red light flashing.

Postby Chippy » Fri Jul 13, 2018 3:07 pm

I have an old style (Blue Driver) Universal OBDII Interface connected to a 2002 Elise (Rover engine). When tested on the RT Live Monitor using the hardware connection in fig. 4.6 of the manual, no data was shows. Despite the ignition being switched on the LED status light flashes red about every 10 seconds, (waiting for the ignition to be switched on status). The vehicle ODB port works fine with a bluetooth OBD reader. Is this a interface hardware or problem, or can it be solved with a re-flash?

Thanks

racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Re: Universal ODBII Interface red light flashing.

Postby racetec » Wed Jul 18, 2018 11:36 am

I would suggest trying on other vehicles if you have access to others. Also try plugging the OBDII interface in to the vehicle when the engine is running.

Martin

Gadget555
Posts: 5
Joined: Fri Jun 05, 2020 4:49 pm

Re: Universal ODBII Interface red light flashing.

Postby Gadget555 » Wed Jun 24, 2020 10:05 pm

What was the outcome of this? Did "Chippy" manage to get his dash working with the Universal OBDII Interface? As it would be nice to see if people actully got to the bottom of their problems.


Return to “Installation questions”

Who is online

Users browsing this forum: No registered users and 23 guests