Universal ODBII Interface red light flashing.
Posted: Fri Jul 13, 2018 3:07 pm
I have an old style (Blue Driver) Universal OBDII Interface connected to a 2002 Elise (Rover engine). When tested on the RT Live Monitor using the hardware connection in fig. 4.6 of the manual, no data was shows. Despite the ignition being switched on the LED status light flashes red about every 10 seconds, (waiting for the ignition to be switched on status). The vehicle ODB port works fine with a bluetooth OBD reader. Is this a interface hardware or problem, or can it be solved with a re-flash?
Thanks
Thanks