Wiring VDO sendors

Kanoa9321
Posts: 2
Joined: Wed Nov 12, 2008 4:10 am

Wiring VDO sendors

Postby Kanoa9321 » Wed Nov 12, 2008 4:15 am

I want to log the oil pressure from my VDO oil pressure sender. I understand about the equation part of it, but am a little unsure on the actual wiring of it.

Can I just run a wire from the VDO sender to one of the analog channels or is their more to it. I see in other posts requarding the VDO senders people mention adding a resistor. Do I need to add a resistor before the input of the DL1.


Thanks

Kanoa9321
Posts: 2
Joined: Wed Nov 12, 2008 4:10 am

Postby Kanoa9321 » Fri Nov 21, 2008 4:59 am

hundreds of responses reguarding cailibrating the senders but nobody has ever wired one up ?????

Jimster
Posts: 134
Joined: Wed Mar 19, 2008 11:06 pm
Location: Bridgend, South Wales
Contact:

Postby Jimster » Fri Nov 21, 2008 3:42 pm

you need to create a voltage deviding curcuit,
here's how I did mine
http://www.race-technology.com/forum/vi ... highlight=


Return to “Sensor-related questions”

Who is online

Users browsing this forum: No registered users and 25 guests