Page 1 of 1
Oil pressure warning light
Posted: Sun Feb 20, 2011 10:50 am
by emersom
Hi,
Has anyone on here fitted a simple oil pressure warning light with a DL1. Is this possible? If so how?!
Cheers!
Posted: Sun Feb 20, 2011 5:59 pm
by osborni
The longacre one is just a relay. It will go "high" when the oil pressure is too low.
Posted: Sun Feb 20, 2011 6:05 pm
by emersom
Anyone help with this one?
Posted: Mon Feb 21, 2011 9:04 am
by emersom
Or how can one use a Dash 3 with a DL1 to show a low oil pressure warning?
Posted: Mon Feb 21, 2011 1:16 pm
by osborni
assuming you have a oil pressure sensor wired up, the knowledge base should have information on how to get the Dash3 to display a warning. I have a Dash2 and don't know the ins and out of a D3.
If all you want is a warning light, I would suggest a stand alone one. You can pick up the voltage that lights up the warning light with the DL1.
A stand alone warning system is simpler and gives you some redundancy to the R-T data loggers.