Analog input
Posted: Tue May 29, 2012 11:02 am
I have a Dash3 connected to my DL1 and I have recently installed 2 sensors (oil pressure&temp) to the Analog1 and Analog2 inputs.
The problem: Both sensors are showing funny readings on the Dash3. Most of the time, the oil pressure for example is showing -.- or is heavily fluctuating. The temperature is also most of the time off and is fluctuating.
Is it normal that when I unplug the sensor cables from the DL1 connector, the Dash3 is still showing me numbers? It looks as if there was still some current on the Analog1&2 inputs ?
All help appreciated!
Cheers,
Joël
The problem: Both sensors are showing funny readings on the Dash3. Most of the time, the oil pressure for example is showing -.- or is heavily fluctuating. The temperature is also most of the time off and is fluctuating.
Is it normal that when I unplug the sensor cables from the DL1 connector, the Dash3 is still showing me numbers? It looks as if there was still some current on the Analog1&2 inputs ?
All help appreciated!
Cheers,
Joël