Turbo Boost Sensor

Post Reply
m3driver
Posts: 9
Joined: Thu Sep 28, 2006 3:53 pm

Turbo Boost Sensor

Postby m3driver » Thu Sep 28, 2006 4:09 pm

I'm looking for a sensor to use in a turbo application. Boost pressure will be fairly high and I'd like a sensor that goes to 5 bar. Does anyone know of a sensor I could use that would be compatible with a DL1?

thanks

Marco
Top
Dan
Posts: 7
Joined: Mon Mar 27, 2006 1:06 am
Location: Melbourne Australia
Contact:
Contact Dan

Postby Dan » Wed Oct 11, 2006 3:07 am

G'day Marco,

For engine mapping, we use the Honeywell/TI units.There are two models
a) 5 bar absolute, which means and output range of 4 bar pressure and full vacuum.
b) 0-100psi - pressure only

If you need one, write directly to me - sales@mmsport.com.au

Cheers, Daniel
Last edited by Dan on Sat Oct 24, 2009 6:53 am, edited 1 time in total.
Meridian Motorsport P/L www.mmsport.com.au/
Top
Jimster
Posts: 134
Joined: Wed Mar 19, 2008 11:06 pm
Location: Bridgend, South Wales
Contact:
Contact Jimster

Postby Jimster » Wed Mar 26, 2008 3:47 pm

surley you could take the 5v output from your current map sensor (going to your ECU?
Top
m3driver
Posts: 9
Joined: Thu Sep 28, 2006 3:53 pm

Postby m3driver » Thu Mar 27, 2008 3:47 am

Jimster wrote:surley you could take the 5v output from your current map sensor (going to your ECU?


Yes but - application was in a BMW 335d race car that BMW did not want me hacking into their harness.

Marco
Top
Post Reply

Return to “Sensor-related questions”

Who is online

Users browsing this forum: No registered users and 35 guests