Oil pressure sensor

Porth
Posts: 5
Joined: Fri Dec 07, 2012 7:06 am

Oil pressure sensor

Postby Porth » Fri Dec 07, 2012 12:11 pm

Hello,

My name is Patrick and I'm new here. Just bought a Dash2 and a DL1 to fit in my Golf Mk3. I would like to connect the important sensors dircetly to the Dash2. No I have to split the 50mA of the 5V-signal on four Sensors. Can anyone tell me the max. current of the oil pressure sensor offered by RT?
Thanks!

Porth
Posts: 5
Joined: Fri Dec 07, 2012 7:06 am

Postby Porth » Sun Dec 09, 2012 8:32 pm

I now found in the "knowledge base" section a current consumption of less than 7.5A. This seems really high to me. Is it possible, that there is a fault and the right value is less than 7.5mA?

Support

Support

Postby Support » Mon Dec 10, 2012 12:48 pm

Good spot, it should read <7.5mA. I will have it corrected.

:-)

Porth
Posts: 5
Joined: Fri Dec 07, 2012 7:06 am

Postby Porth » Mon Dec 10, 2012 9:14 pm

Thanks for the reply. I had really serious concerns about that.


Return to “Sensor-related questions”

Who is online

Users browsing this forum: No registered users and 33 guests