wiring gear position sensor for dash 2

andypipe
Posts: 19
Joined: Mon Apr 30, 2012 1:34 pm

wiring gear position sensor for dash 2

Postby andypipe » Fri Feb 07, 2014 10:04 am

Im about to install a sequential box and want to wire up the gear indicator display on my dash 2.
im using a penny and giles hall effect rotary position sensor which has a feed, ground and wiper connection.
the dash 2 manual says on connector 1 use pin 9 (input 1) and pin 6 ground. how would this work with the position sensor i have as the wiper output is works from the live connection

Support
Posts: 399
Joined: Mon Nov 21, 2005 4:09 pm

Support

Postby Support » Mon Feb 10, 2014 11:06 am

Hello,

Which model of sensor do you have?>>> http://www.pennyandgiles.com/getattachm ... e_oct11(EN)


The connections for this one for example would be
Yellow - Connector 1 pin 9
Red - Connector 2 pin 9
Black - Connect 1 or 2 pin 6
Image

Kind regards,
Support (K)
______________________________
Posted by Race Technology Support


Return to “Sensor-related questions”

Who is online

Users browsing this forum: No registered users and 29 guests