RT oil pressure sensor...
Posted: Fri Mar 28, 2014 1:07 pm
...I'm a bit confused (quite easy these days)
Been reading a lot on the forum regarding pull-up resistors on VDO pressure sensors.
Do I need 1 for the RT supplied sensors too?
The oil temp sensor needs to have a 1kOHM fitted.
Any ideas?
Been reading a lot on the forum regarding pull-up resistors on VDO pressure sensors.
Do I need 1 for the RT supplied sensors too?
The oil temp sensor needs to have a 1kOHM fitted.
Any ideas?
