Reset Steering Angle Dashpro 2
Posted: Mon Jul 03, 2017 1:43 pm
Hi, currently running a Dashpro 2 with a wire pot sensor on the steering column. (Wire running around the steering column into a sensor box)
Having fitted a new steering rack (Honda Civic Type R Electric assisted) I have two issues.
1. I cannot work out how to reset the steering angle on the dash to zero
2. The steering angle changes when the ignition is turned on and then changes again when the fuel pump is turned on.
Sorry if these are simple issues but relatively new to this.
Thanks
Mark
Having fitted a new steering rack (Honda Civic Type R Electric assisted) I have two issues.
1. I cannot work out how to reset the steering angle on the dash to zero
2. The steering angle changes when the ignition is turned on and then changes again when the fuel pump is turned on.
Sorry if these are simple issues but relatively new to this.
Thanks
Mark