Airspeed/Pressure Differential Sensing

phantomjock
Posts: 24
Joined: Sat Sep 17, 2016 9:37 pm

Airspeed/Pressure Differential Sensing

Postby phantomjock » Wed Feb 13, 2019 1:36 pm

I am considering adding an integrated pressure sensor suite to my data collection. I say suite, as I will want to take differential pressure readings at several locations at once. The sensors I am considering are of the MPXV5004G series piezoresistive transducer family.

download/file.php?id=98

1. Power supply - The DL-1 Club has 2 @ 5v outputs. Should I use these - or best to add an external step down regulator to supply these devices?

download/file.php?id=99

2. The analog versions are susceptible to a lot of noise. But they are simple 3 wire connections, +5v, GND, Sig. The digital are much cleaner but are 4 pins; +5v, GND, SCL, SLA. My question regarding a 4 pin connection - can I just not connect the SCL (serial clock - timing) and let the DL-1 sort it out - or is there some recommended means to connect a 4 pin sensor? I find 1, 2, and 3 in the Knowledge Base, but not 4 pins. Is this possible?


Thanks.

Cheers - Jim


As an aside, I also have 2 brake pressure sensors similar to these
download/file.php?id=100

They are 3 wire so no problems there - but the same power supply question.
Working Voltage: 5VDC
Output Voltage: 0.5-4.5 VDC
Sensor material: Carbon steel alloy
Working Current: <=10 mA
Attachments
4 pin module.jpg
4 pin module.jpg (22.78 KiB) Viewed 3241 times

phantomjock
Posts: 24
Joined: Sat Sep 17, 2016 9:37 pm

Re: Airspeed/Pressure Differential Sensing

Postby phantomjock » Wed Feb 13, 2019 1:38 pm

Having difficulty inserting the images - but I hope "you'll get the picture."
Attachments
3 pin analog device.jpg
3 pin analog device.jpg (52.14 KiB) Viewed 3240 times

phantomjock
Posts: 24
Joined: Sat Sep 17, 2016 9:37 pm

Re: Airspeed/Pressure Differential Sensing

Postby phantomjock » Wed Feb 13, 2019 1:39 pm

looks like max of one per post - here is the brake sensor
Attachments
boost pressure sensor.jpg
boost pressure sensor.jpg (27.67 KiB) Viewed 3239 times

racetec
Site Admin
Posts: 292
Joined: Thu Oct 27, 2005 12:02 pm

Re: Airspeed/Pressure Differential Sensing

Postby racetec » Wed Feb 13, 2019 3:29 pm

I am not sure what you mean on the four pin connector. The one with the SCL and SDA pins is an I2C sensor which you can not connect to the DL1, there is no way it can communicate directly with that.

If the sensors need a 5v supply then you will be fine with the output from the DL1, this is a well regulated 5v, there is no real advantage to fitting an external regulator.

Martin

phantomjock
Posts: 24
Joined: Sat Sep 17, 2016 9:37 pm

Re: Airspeed/Pressure Differential Sensing

Postby phantomjock » Wed Feb 13, 2019 4:50 pm

Thanks - My question was related to the I2C. You've answered that.
I'll go with the Analog version (cheaper) and 3 pin, +5v, GND, SIG.

Cheers - Jim


Return to “Sensor-related questions”

Who is online

Users browsing this forum: No registered users and 3 guests