VDO oil pressure sender with DL1/Dash2

lsdweb1

Postby lsdweb1 » Fri Apr 25, 2008 10:50 pm

And here's the chart showing the calculated values and those measured (using a footpump and spare gauge!)

Image

lsdweb1

Postby lsdweb1 » Sat Apr 26, 2008 9:45 am

I've posted all the VDO data I have - here

[/url]

Mark
Posts: 1
Joined: Sun Aug 24, 2008 11:48 pm

VDO pressure sensor calibration files

Postby Mark » Sun Aug 24, 2008 11:58 pm

Hi
Can anyone please send VDO pressure sensor and Temp sensor calibration files they may have to suit Dash 2
mark@ballaratbolts.com.au
most appreciated
Cheers
Mark

westysprinter
Posts: 20
Joined: Tue Dec 16, 2008 12:28 pm
Location: Darlington

Postby westysprinter » Thu Dec 18, 2008 8:15 pm

Support wrote:Hi Everyone,

I'm getting quite a few support questions relating to connecting the VDO sensors to our products... so I'm going to put up a wiki page o the site about them and how to set them up. If there is any calibration information available then please forward it to me at andrew at race-technology dot com and I'll make sure that it gets included!

Kind regards,

Andy


Come on Andy stick a link on then :D
I would like tables for 5 bar oil std water temp and fuel sender
Polygon motorsport
for all your 7 needs

69VERT
Posts: 1
Joined: Tue Jan 20, 2009 1:26 am

Postby 69VERT » Tue Jan 20, 2009 1:38 am

VDO has a few technical support documents that include resistance charts for the instrumentation that they manufacture. You can find it here.

http://usa.vdo.com/products_solutions/c ... uments.htm


Return to “Sensor-related questions”

Who is online

Users browsing this forum: No registered users and 24 guests