Enable calculus on DL1Mk3/Dash4Pro

evl
Posts: 83
Joined: Tue Nov 22, 2005 7:41 pm

Enable calculus on DL1Mk3/Dash4Pro

Postby evl » Sat May 19, 2012 6:29 pm

Hi,

It would be nice to enable calculus on the DL1/Dash like you have in the analysis program. For instance, it would be great to put total fuel consumption on the dash based on integrating either a fuel flow meter or injector pulse width * rpm.

-Chris

Support

Postby Support » Mon May 21, 2012 9:13 am

If you are using the analogue inputs on the DL1 MK3 then you can set these to integrate. You can also use pulse counting on the pulse inputs if you have the enhanced frequency input option.
I will make a note of this and see if it can be added to user defined variables in the future.

Martin

evl
Posts: 83
Joined: Tue Nov 22, 2005 7:41 pm

Postby evl » Mon May 21, 2012 11:48 am

Thanks. I'm using RPM from an ECU->Serial interface, so I think it would have to be enabled on the math channels for my application.


Return to “New hardware feature requests”

Who is online

Users browsing this forum: No registered users and 31 guests