DASH 3 / SOFTAWARE DON'T CONNECT

jcmagne
Posts: 28
Joined: Fri Mar 02, 2007 4:04 pm

DASH 3 / SOFTAWARE DON'T CONNECT

Postby jcmagne » Fri Sep 12, 2008 9:17 am

i just received this morning a serial adapter (usb/serial) from RT.
But I can't connect to DASH3 with the software ...
always the same message "system can't detect the sequence"...
the help file says "connect to serial port on PC and power on the device"
but how can you power on the dash3 when it is connected to your serial adaptateur ????
I work with Vista.
JC

RTUSA
Site Admin
Posts: 457
Joined: Fri Feb 24, 2006 7:34 pm
Location: Richmond, VA, USA

Postby RTUSA » Thu Oct 02, 2008 4:09 am

Connecting the DASH3 to a PC will require a special serial cable w/ 12V input leads to power the DASH3. RT can sell you one.

But - I find it much more convenient to configure or reflash the DASH3 via the DL1, so I never use the special lead even though I have some!
Al Seim
Race Technology USA

Axilane
Posts: 2
Joined: Fri Jul 11, 2008 6:11 am
Location: France
Contact:

Postby Axilane » Thu Nov 13, 2008 1:08 pm

Solved, see in French section
Best regards
Stéphane
Fabrice @ Axilane Instruments
Distributeur Officiel France
Email : vuillemenot@axilane.com
Tel : +33.651.69.68.67


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 8 guests