Ax22 + Dash2 = Speed problems..

[SantaClaw]

Hi, I've got the AX22 and the Dash 2 installed in my car, but I can't get the GPS speed from the AX22 to be displayed in the Dash 2.

I've set RS232 speed to yes, and the Dash 2 speed to no.

Speed & GPS data diplays fine in the AX22 display..



I can't seem to update the AX22 firmware either, I just get an error message that reads something like:

"The device is not responding correctly, please check it it connected correctly"

But.. I've used the same computer/serial\usb to reflash the dash2, and to configure it with no problems..

[Support]

You will only get streaming serial data from the AX22 when it is in continuous timing mode.
For updating the firmware, make sure that the unit has no power, and is not simply turned off when the re-flashing procedure is started.