Hi Mates.
we got the same problem. no contact or it upload without edit the dash.... NEED HELP. Rallying in 2 weeks and this is fucket.
At the start it Work, all buttons Works, run a usb-serial. At lite monitor we can see live update on all sensors. I didt upload my file and then try to reload it wiht no luck. Then try to reflash and now its frozzen.
Can i get some help, pleas.
If i can get some team viewer support, pleas.
Frozen dash
-
- Posts: 110
- Joined: Wed Jul 04, 2007 11:33 pm
- Location: Toronto, Canada
- Contact:
You're not very specific.
I assume you mean a Dash2? I have a hell of a time getting them to flash with the serial cable. The flash crashes almost every time.
However, if you flash it from the card on a DL1, it works every time. And it's a lot faster. Put the HEX file on a clean flash card in the DL1 and just turn it on.
I found you can not kill the unit if it crashes. You just have to flash it again.
I assume you mean a Dash2? I have a hell of a time getting them to flash with the serial cable. The flash crashes almost every time.
However, if you flash it from the card on a DL1, it works every time. And it's a lot faster. Put the HEX file on a clean flash card in the DL1 and just turn it on.
I found you can not kill the unit if it crashes. You just have to flash it again.
Peter Carroll, Toronto, Canada
DL1 and Dash2 - http://DriversMeeting.com/pcarroll
DL1 and Dash2 - http://DriversMeeting.com/pcarroll
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 5 guests