dash2+ MS1 Extra will they work

Rigo-rod
Posts: 7
Joined: Thu Jun 27, 2013 6:39 am
Contact:

dash2+ MS1 Extra will they work

Postby Rigo-rod » Tue Jul 02, 2013 9:10 am

have anyone tryed dash 2 with ms1 extra serial and got it to work?


i have the dash2 with ms2 cabel have tryed to get it to work but not secceded yet

if you have got it to work how ?

best regards

Support

Postby Support » Mon Jul 08, 2013 2:01 pm

Do you have any documentation to suggest that the output serial data stream from the MS1 and MS2 are the same?

Martin

Rigo-rod
Posts: 7
Joined: Thu Jun 27, 2013 6:39 am
Contact:

Postby Rigo-rod » Wed Jul 10, 2013 6:04 am

Support wrote:Do you have any documentation to suggest that the output serial data stream from the MS1 and MS2 are the same?

Martin


im waiting for answer from megasquirt

Rigo-rod
Posts: 7
Joined: Thu Jun 27, 2013 6:39 am
Contact:

Postby Rigo-rod » Sat Jul 13, 2013 12:26 am

nobody at any megasquirt pages seems to know.. so badly its looks like i have to sell my awsome dash2 plus the logger :( becasue i vant use it

Rigo-rod
Posts: 7
Joined: Thu Jun 27, 2013 6:39 am
Contact:

Postby Rigo-rod » Sun Jul 14, 2013 7:26 pm

im think i will need to sell it because i cant get it to work with ms1 or work at all

Rigo-rod
Posts: 7
Joined: Thu Jun 27, 2013 6:39 am
Contact:

Postby Rigo-rod » Mon Jul 15, 2013 8:38 am

No the data is not the same. Ms2 sends a lot more data and it does it at a much faster baud rate.

so i cant runt ms1extra with dash 2 +dl1 damn..

i think i will be needed to sell my dash because it just have 4 analog output so its maby to few

Rigo-rod
Posts: 7
Joined: Thu Jun 27, 2013 6:39 am
Contact:

Postby Rigo-rod » Mon Jul 15, 2013 7:04 pm

what exact do ypu need to make ms1 work with with your dash?

thokes82
Posts: 38
Joined: Wed Oct 24, 2012 4:11 pm

Postby thokes82 » Fri Aug 23, 2013 4:18 pm

MS1 is totally different from MS2. It is 9600bps communication.

Here is the specification of the protocoll.
http://www.msextra.com/doc/ms1extra/COM_RS232.htm


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 9 guests