Datalog start/stop Dash2Pro

evel
Posts: 2
Joined: Sat Dec 17, 2016 3:09 am

Datalog start/stop Dash2Pro

Postby evel » Sat Feb 11, 2017 1:21 am

Hey,

Could someone please let me know what im doing wrong? Iv wired up a extra button to analogue input 2 to tell the dash to being datalogging but when I press it nothing happens :( . I have wired the button as shown in the attached picture and I have also included some screenshots of how the dash is configured. Iv also had analogue 2 displayed on the dash to ensure I have wired it correctly, and when I push the button I see 13V (battery voltage) displayed on the appropriate data area
Image
Image
Attachments
Switch wiring.png
Switch wiring.png (2.95 KiB) Viewed 10464 times

Support
Posts: 399
Joined: Mon Nov 21, 2005 4:09 pm

Re: Datalog start/stop Dash2Pro

Postby Support » Mon Feb 13, 2017 9:13 am

Hi there,

Please ensure that "Logging Status" is set to internal source in the variable source menu of the configuration software. You can find this at the bottom of the list in Misc.

If this is ok, please drop me an email with your configuration file attached.

sam@race-technology.com

Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 7 guests