Hi
Have connected a DL1 with Dash2. Cannot start the logger from the Dash2. Have enabled gsm modem in config.
What to do?
/Petter
Trigger and add marker from Dash2 to Dl1 not working
Trigger and add marker from Dash2 to Dl1 not working
Last edited by Petter on Sun Jul 01, 2007 11:52 pm, edited 1 time in total.
Further investigations...
The LED is now working when I start logging by pressing the button on the DL1.
The functions "add marker" and "trigger logger" that I try to send from Dash2 to DL1 is not delivered. Have tried different setups in the configuration program but it seems like there isn´t any communication.
What to do? Have GSM modem enabled like it says in the helpfile.
/Petter
The functions "add marker" and "trigger logger" that I try to send from Dash2 to DL1 is not delivered. Have tried different setups in the configuration program but it seems like there isn´t any communication.
What to do? Have GSM modem enabled like it says in the helpfile.
/Petter
Firmware
Hello!
I´m using firmware version 7-5. The logger is working fine but the communication with the Dash2 isn´t the best. It´s the old logger. It dosen´t present laptimes or predictive timing either. Have worked some times but far from often.
Regs / Petter
I´m using firmware version 7-5. The logger is working fine but the communication with the Dash2 isn´t the best. It´s the old logger. It dosen´t present laptimes or predictive timing either. Have worked some times but far from often.
Regs / Petter
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 5 guests
