RPM values showing 30% lower than what they should be on DL-1.

Alexvos1
Posts: 1
Joined: Thu Aug 17, 2017 11:53 am

RPM values showing 30% lower than what they should be on DL-1.

Postby Alexvos1 » Thu Aug 17, 2017 12:13 pm

Good afternoon

We have the Race Technology DL-1 in our Formula ford Kent. All of the values seem to be correct except the RPM values- showing about 30% lower than what they should be ( RPM of 4500 instead of 6500 ). This has been occurring since we first installed the DL-1.

Is it likely to be a configuration issue or is it something more complicated than that ?

Any help would be greatly appreciated !

Support
Posts: 399
Joined: Mon Nov 21, 2005 4:09 pm

Re: RPM values showing 30% lower than what they should be on DL-1.

Postby Support » Thu Aug 17, 2017 2:55 pm

Hi There,

Where is the RPM signal being taken from on the vehicle? and to which input are you connecting it to on the DL1?

Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 3 guests