Page 1 of 1

RPM values showing 30% lower than what they should be on DL-1.

Posted: Thu Aug 17, 2017 12:13 pm
by Alexvos1
Good afternoon

We have the Race Technology DL-1 in our Formula ford Kent. All of the values seem to be correct except the RPM values- showing about 30% lower than what they should be ( RPM of 4500 instead of 6500 ). This has been occurring since we first installed the DL-1.

Is it likely to be a configuration issue or is it something more complicated than that ?

Any help would be greatly appreciated !

Re: RPM values showing 30% lower than what they should be on DL-1.

Posted: Thu Aug 17, 2017 2:55 pm
by Support
Hi There,

Where is the RPM signal being taken from on the vehicle? and to which input are you connecting it to on the DL1?

Kind Regards,
RT Support (SK)