Been running it for about a month when one time the display just up and froze while driving. Had to pull over, kill ignition, and start back up again, and everything's been fine since... Running the most current Dash 2 software.
Just another surprise feature I guess, so this is posted in case others are experiencing the same.
Dash 2 froze
I had this when I first installed the Dash2 (several years ago) and installed a button in the 12V feed to the Dash2 so I could reboot it while still driving.
The issue was fixed by RT as it was a corruption over the ECU lead from the Omex ECU. They did an update which error checked the info being passed and I've not had an issue since.
I suggest you either contact RT support or do what I did with the power.
The issue was fixed by RT as it was a corruption over the ECU lead from the Omex ECU. They did an update which error checked the info being passed and I've not had an issue since.
I suggest you either contact RT support or do what I did with the power.
Who is online
Users browsing this forum: No registered users and 2 guests
