Documentation Errors

Stratocaster
Posts: 13
Joined: Mon Apr 12, 2010 4:34 pm
Location: Houston TX

Documentation Errors

Postby Stratocaster » Mon Apr 14, 2014 11:17 pm

http://www.race-technology.com/wiki/index.php/DL1MK3/Connections

1, The connection table lists the GND connection once. However there are two GND connections. They should both be documented and if anything is different call that out.

2. The connection table is out of order. Reading from the table from top to bottom maps to the rear of the unit, right to left from A1-12, then it skips around.

Where this table maps out, reading from the table from top to bottom maps to the rear of the unit, right to left
http://www.race-technology.com/wiki/index.php/DL1Sport/Connections

http://www.race-technology.com/wiki/index.php/DL1MK3/Operation
1. This table lists the grounds three times. One being labeled with a warning as ESSENTIAL!

2. The connection table is out of order. Reading from the table from top to bottom maps to the rear of the unit, right to left from A1-12, then it skips around.

Same issue as above.
http://www.race-technology.com/wiki/index.php/DL1Sport/Operation

Support
Posts: 346
Joined: Mon Nov 21, 2005 4:09 pm

Postby Support » Tue May 06, 2014 9:14 am

Thanks for the input. The table is not intended to go from left to right or top to bottom, it just lists all of the connections in sensible groups and says what they are. I will update the one on the operation with the three ground connections on it though as that is confusing.

Martin
______________________________
Posted by Race Technology Support


Return to “Bug reports”

Who is online

Users browsing this forum: No registered users and 2 guests