Is there a way to get data from an Arduino into the DL1 using the serial input of the DL1?
Basically what format do I need to provide coming out of the Arduino to get the DL1 to log this data?
Thank you!
-Kyle
Arduino
Support
Hello,
Here is our data format>>> http://www.race-technology.com/wiki/ind ... DataFormat
If you can program the Ardunio to match this protocol then no interface is needed.
Support
(K)
Here is our data format>>> http://www.race-technology.com/wiki/ind ... DataFormat
If you can program the Ardunio to match this protocol then no interface is needed.
Support
(K)
Support
Yes, extended channels can be found inside those channels>>> http://www.race-technology.com/wiki/ind ... ureChannel
I'm looking at a similar project with a different micro, any chance you could show a sample of the serial output of say an analogue output?
how is each message separated, with a \r \n or something?
how is each message separated, with a \r \n or something?
You only need 2 things in your tool box, duct tape and WD40.
-if it moves and it shouldn't use the duct tape
-if it doesn't move and it should use the WD40
-if it moves and it shouldn't use the duct tape
-if it doesn't move and it should use the WD40
Support
Hello,
Here is some sample code. If you download a sample run from the website for an example run.
http://www.race-technology.com/wiki/ind ... eVBDecoder
Here is some sample code. If you download a sample run from the website for an example run.
http://www.race-technology.com/wiki/ind ... eVBDecoder
-
- Posts: 14
- Joined: Mon Mar 21, 2011 6:43 am
- Location: Hillsborough, NC
-
- Posts: 14
- Joined: Mon Mar 21, 2011 6:43 am
- Location: Hillsborough, NC
Hi Justin
I'm having not having much luck getting my micro to talk to the DL1, it's not an Arduino but your code might give me a hint to why its not working, any chance you could send me a copy? colinbyrne105(at)optusnet.com.au
cheers
I'm having not having much luck getting my micro to talk to the DL1, it's not an Arduino but your code might give me a hint to why its not working, any chance you could send me a copy? colinbyrne105(at)optusnet.com.au
cheers
You only need 2 things in your tool box, duct tape and WD40.
-if it moves and it shouldn't use the duct tape
-if it doesn't move and it should use the WD40
-if it moves and it shouldn't use the duct tape
-if it doesn't move and it should use the WD40
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 13 guests