hello forum,
my current setup in my caterham:
DASH3
VIDEO4
DL1 connected to KMS25 ECU
analog displays for speed, oilpressure, water temp, rpm
I'm going to build a new caterham, so my idea is the following:
DASH2pro for speed, oilpressure, oiltemp, water temp, rpm
including the onboard gps data logging
together with the VIDEO4
then I don't need the DASH3 and DL1 anymore.
Is this correct? Does the DASH2pro (including the gps) work together with the VIDEO4? With all gps functions like the DL1?
thanks in advance
Matthias
which dash for my cat?
Hi Matthias,
The DASH2 PRO does indeed work with the VIDEO4 in exactly the same way as your DL1.
There are slight differences to how they should be connected compared to your current setup but other than that it is a very straight forward swap.
Any further questions please email me on sam@race-technology.com and I shall do my best to help.
Kind Regards,
Support
(SK)
The DASH2 PRO does indeed work with the VIDEO4 in exactly the same way as your DL1.
There are slight differences to how they should be connected compared to your current setup but other than that it is a very straight forward swap.
Any further questions please email me on sam@race-technology.com and I shall do my best to help.
Kind Regards,
Support
(SK)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “General support questions”
Who is online
Users browsing this forum: Bing [Bot] and 53 guests