I'm trying to create a simple circular acceleration graph using the Dynamic Line control in the Video overlay configuration tool version 2.4.44
I'm using 'Lat Accel' in the X axis and 'Lon Accel' in the Y axis.
I've tried a bunch of different configurations with both the start and end points.
No matter what I try I get two fixed points that do not move...
Any help will be appreciated.
Setup Dynamic line for a G-Graph in Video4 configuration tool
-
- Posts: 20
- Joined: Fri Jan 10, 2014 1:03 am
- Location: Montreal, Québec, Canada
-
- Posts: 20
- Joined: Fri Jan 10, 2014 1:03 am
- Location: Montreal, Québec, Canada
Re: Setup Dynamic line for a G-Graph in Video4 configuration tool
So I've been trying to solve this in a couple of different ways.
I tried a factory layout (Exo) that came with a dynamic line on a sample video and it works. The ball moves with lat and long Gs.
I used the exact same parameters on my layout which I design starting from the factory GT layout.
All changes I made as well as modifications work but that dot will just not move...
I'm using the end dot only with a '0' multiplier. I'm obviously using lat and long accelerations for 'x' and 'y' axis.
I tried something stupid like gears and vector acceleration to see if the dot would move with other inputs. That dot is still stationary.
I'm sure this is some secondary configuration that I'm missing.
Surely someone else has made this work before me...
I tried a factory layout (Exo) that came with a dynamic line on a sample video and it works. The ball moves with lat and long Gs.
I used the exact same parameters on my layout which I design starting from the factory GT layout.
All changes I made as well as modifications work but that dot will just not move...
I'm using the end dot only with a '0' multiplier. I'm obviously using lat and long accelerations for 'x' and 'y' axis.
I tried something stupid like gears and vector acceleration to see if the dot would move with other inputs. That dot is still stationary.
I'm sure this is some secondary configuration that I'm missing.
Surely someone else has made this work before me...
Re: Setup Dynamic line for a G-Graph in Video4 configuration tool
Hi There,
Please could you send over your configuration to me via email and I'll look into this for you.
sam@race-technology.com
Kind Regards,
RT Support (SK)
Please could you send over your configuration to me via email and I'll look into this for you.
sam@race-technology.com
Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 12 guests