I have a question about installing S80Pro, Dash2 DL1 and to work together. I want to use the CAN interface. Can I use standard CAN interface or having to buy this ECU interface - CAN (DTA S80)?
Regards,
Plamen Angelov
CAN interface - S80Pro/Dash2/DL1
CAN interface - S80Pro/Dash2/DL1
VW Golf MK2 16V Turbo Quattro - sold
VW Golf MK4 AWD kitcar for hill climb and track racing
VW Caddy Life 2.0 TDI - daily vehicle
VW Golf MK4 AWD kitcar for hill climb and track racing
VW Caddy Life 2.0 TDI - daily vehicle
Morning,
From our records the S80 has the same output format as the S60 - and we have a CAn configration file for this that is already in use with lots of customers.
You can order a standard CAN interface and load on this configuration, or if you tell us what the CAN adapter is for when you order it - we can pre-configure it for you.
Kind regards,
support
From our records the S80 has the same output format as the S60 - and we have a CAn configration file for this that is already in use with lots of customers.
You can order a standard CAN interface and load on this configuration, or if you tell us what the CAN adapter is for when you order it - we can pre-configure it for you.
Kind regards,
support
-
- Posts: 7
- Joined: Thu Apr 21, 2016 6:57 am
Re: CAN interface - S80Pro/Dash2/DL1
Hello "support",
At first, in 2014, I ordered an DL1club with dash4pro (I believe it was fairly new in OLED) and an KMS-interface cable.
Because I didn't install the KMS directly, after some time I also ordered an OBD-interface cable.
I ran my Z3-race car for some time with this OBD-interface cable + some direct analogue inputs.
Now I have installed a DTA S100pro, instead of the KMS (as KMS is not able to operate the BMW's vanos system).
Can I reuse the KMS-cable?
Thanks,
Koen Delvaux
At first, in 2014, I ordered an DL1club with dash4pro (I believe it was fairly new in OLED) and an KMS-interface cable.
Because I didn't install the KMS directly, after some time I also ordered an OBD-interface cable.
I ran my Z3-race car for some time with this OBD-interface cable + some direct analogue inputs.
Now I have installed a DTA S100pro, instead of the KMS (as KMS is not able to operate the BMW's vanos system).
Can I reuse the KMS-cable?
Thanks,
Koen Delvaux
Re: CAN interface - S80Pro/Dash2/DL1
Hello
The interface will need to be returned to Race Technology to be reconfigured to use with the DTA.
Please contact service at race - technology dot com for further details and cost information if you would like to proceed with this.
The interface will need to be returned to Race Technology to be reconfigured to use with the DTA.
Please contact service at race - technology dot com for further details and cost information if you would like to proceed with this.
Return to “Installation questions”
Who is online
Users browsing this forum: No registered users and 4 guests