analogue input

bazza_c
Posts: 8
Joined: Thu Apr 06, 2006 7:15 pm

analogue input

Postby bazza_c » Fri Apr 07, 2006 8:00 pm

I want to connect a switch that will allow me to manually mark 'lap-sector ' markers for later viewing in the x-y graph. Is it is just a case of connecting the 5v output to analogue input via a switch? Essentially I just want the analogue input to register a voltage increase, but it needs to be something that can be registered in a split second, and still viewed on the graph. I would need detailed guidance on how to wire ot correectly to the DL1 to avoid damaging it.

jlucas
Posts: 302
Joined: Tue Nov 29, 2005 12:45 am
Location: East Liberty, OH
Contact:

Postby jlucas » Sat Apr 08, 2006 5:52 pm

email support, I believe you can use the lap beacon input for this
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer

RTUSA
Site Admin
Posts: 457
Joined: Fri Feb 24, 2006 7:34 pm
Location: Richmond, VA, USA

Postby RTUSA » Mon Apr 17, 2006 1:29 am

Jeremy is right, just wire the beacon input to the 5V output through a momentary contact switch.
Al Seim
Race Technology USA


Return to “Sensor-related questions”

Who is online

Users browsing this forum: No registered users and 31 guests