Dash 4 locking up after reflash?

924RACR · Joined: 13 Jul 2010 Posts: 44

Anyone else having a problem with the Dash4 locking up after a reflash/reconfig?

Latest iteration, we've re-loaded the firmware, get "invalid config", then load up a valid (previously used to good effect) dash config, get "reprog success" just fine, dash restarts, but NEVER clears from the startup screen after the RPM lights sequence. Buttons don't work either.

But the DL1 is still running fine.

Firmware, dash config, and computer SW are ALL the same versions as what we used successfully last fall at the last race run. Nothing's changed. But the dash is now completely non-functional...

Support · Joined: 31 Oct 2005 Posts: 1341

Hello,

Using DL1 Mk2 to reflash will clear the configuraion as well. Please put the latest firmware on again and when it says "invalid config" please reload the configuraiton file.

BR,
K
_________________
---------------------------------------------
Posted by the Race Technology support team

924RACR · Joined: 13 Jul 2010 Posts: 44

Yeah... ah, we've been trying that without success.