| View previous topic :: View next topic |
| Author |
Message |
marcelb
Joined: 03 Mar 2010
Posts: 7
|
 Posted: Thu Mar 04, 2010 12:13 pm Post subject: DASH 2 AND VIPEC |
 |
|
| Hello all ,my very first post on the board! I'd like to know if there are any plans for an adapter to get the DASH 2 to work with VIPEC ecus? |
|
| Back to top |
|
 |
Support
Joined: 31 Oct 2005
Posts: 1341
|
| Posted: Fri Mar 05, 2010 11:06 am Post subject: |
|
|
The ViPec ECUs have a CAN data output, so you can use the user configurable CAN ECU interface to connect to it. What you will need in order to program the CAN ECU interface is information about the CAN data stream coming from the ViPEC ECU. The manufacturer or dealer should be able to help you with that.
_________________
---------------------------------------------
Posted by the Race Technology support team |
|
| Back to top |
|
|
marcelb
Joined: 03 Mar 2010
Posts: 7
|
| Posted: Fri Mar 05, 2010 1:45 pm Post subject: |
|
|
| Support wrote: | | The ViPec ECUs have a CAN data output, so you can use the user configurable CAN ECU interface to connect to it. What you will need in order to program the CAN ECU interface is information about the CAN data stream coming from the ViPEC ECU. The manufacturer or dealer should be able to help you with that. |
GREAT,I'll see what I can do  |
|
| Back to top |
|
|
marcelb
Joined: 03 Mar 2010
Posts: 7
|
| Posted: Sat Mar 06, 2010 12:30 am Post subject: |
|
|
Hi , I asked about this on the Vipec forum and this is what I got back ;
| rayhall wrote: | Marcel,
Just got this email from them. I will "try again" to get support for the Vipec.
Company: Race Technology
_____________________________________________
Name: Gummi Gudmundsson
_____________________________________________
Message:
Hello,
a number of our customers are/or have expressed interest in using Vipec ECUs in conjunction with out equipment.
In order to assist those customers as best we can would it be possible for you to send me information about the CAN data stream that is output from the ViPec ECUs?
best regards,
Gummi Gudmundsson |
I hope this will finally result in a great union between you guys |
|
| Back to top |
|
|
Support
Joined: 31 Oct 2005
Posts: 1341
|
| Posted: Wed Mar 10, 2010 11:47 am Post subject: |
|
|
It has, Ray from ViPec has been very helpful and is sending us a ViPec ECU to test our interface with.
We should therefore have a working ECU interface soon.
_________________
---------------------------------------------
Posted by the Race Technology support team |
|
| Back to top |
|
|
newman
Joined: 27 Jan 2010
Posts: 7
Location: Buffalo, NY
|
| Posted: Wed Mar 24, 2010 12:05 am Post subject: |
|
|
Great timing... I recently purchased a Vipec to replace my AEM, which the adapter didn't work anyway...
Any idea on an actual release date?
_________________
08 lotus exige S240
87 BMW 325IS w/ skyline GTR drivetrain. |
|
| Back to top |
|
|
Support
Joined: 31 Oct 2005
Posts: 1341
|
| Posted: Wed Mar 24, 2010 11:44 am Post subject: |
|
|
We are in the process of testing the interface now so hopefully it will only be a couple of weeks till one is ready.
_________________
---------------------------------------------
Posted by the Race Technology support team |
|
| Back to top |
|
|
marcelb
Joined: 03 Mar 2010
Posts: 7
|
| Posted: Fri Mar 26, 2010 10:05 pm Post subject: |
|
|
| |
|
| Back to top |
|
|
newman
Joined: 27 Jan 2010
Posts: 7
Location: Buffalo, NY
|
| Posted: Tue Apr 06, 2010 11:57 am Post subject: |
|
|
Any update on this? I installed my ViPEC last night, and need to know if I should wait on this or tear into my wiring harness to at least send the DASH2 an RPM signal...
_________________
08 lotus exige S240
87 BMW 325IS w/ skyline GTR drivetrain. |
|
| Back to top |
|
|
Support
Joined: 31 Oct 2005
Posts: 1341
|
| Posted: Wed Apr 14, 2010 8:21 am Post subject: |
|
|
We now have a working prototype of the ECU interface, the next step is to get the interface tested on a working vehicle so we can make sure all the scaling is correct.
_________________
---------------------------------------------
Posted by the Race Technology support team |
|
| Back to top |
|
|
WillM
Joined: 27 Dec 2006
Posts: 80
|
| Posted: Sat May 08, 2010 3:20 pm Post subject: |
|
|
Do you have a list of the variables supported?
Thanks in advance,
Will |
|
| Back to top |
|
|
Support
Joined: 31 Oct 2005
Posts: 1341
|
| Posted: Wed May 12, 2010 1:41 pm Post subject: |
|
|
I can't confirm the variable list just yet. We have a prototype in testing at the moment so hopefully we will be able to start shipping these shortly.
_________________
---------------------------------------------
Posted by the Race Technology support team |
|
| Back to top |
|
|
marcelb
Joined: 03 Mar 2010
Posts: 7
|
| Posted: Sun May 16, 2010 12:15 am Post subject: |
|
|
| Lovely !! |
|
| Back to top |
|
|
WillM
Joined: 27 Dec 2006
Posts: 80
|
| Posted: Mon May 17, 2010 2:26 pm Post subject: |
|
|
| Great, thanks for the reply! |
|
| Back to top |
|
|
marcelb
Joined: 03 Mar 2010
Posts: 7
|
| Posted: Sat Jun 12, 2010 4:46 pm Post subject: |
|
|
Are we there yet  |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
