ssharkey
Joined: 31 Jul 2007
Posts: 26
Location: Somerset, UK
|
 Posted: Sat Aug 18, 2007 8:03 am Post subject: DASH1 Bargraphs |
 |
|
Not sure if it's possible but as a new feature could we have bargraphs that work? At the moment (apart from LAT and LOG G) they seem to have a mind of their own. We need to be able to specify the range of voltage or value over which they display - can this be done with scaling? If so what are we scaling the value to in order to get a bar graph that works?
Why does the bar graph for rpm not work - on my car I have the RPM page setup correct (even tried using lower shift points on the range to get the lights on earlier) but the bar graph seems to hover around 3/4 when pootling around at 2400rpm and a RPM of final shift light set to 6000rpm. Either the bargraph feature needs to work (range specified for each variable) or if we need to scale the value to achieve this tell us how - it would seem sensible to scale to a percentage. Obviously the rpm bargraph should work without us tinkering. |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
