|

(0)

|

|

|

|

Racing » Products » ECU interfaces » Serial interface

ECU interface - Serial

What is the ECU interface?

The Race Technology ECU interface is a small in-line module for use with a DASH1 or DASH2 display, a DL1 or DL2 data logger or any combination of data logger plus display, to allow data from your engine management system to be displayed and recorded.

Who is the ECU interface designed for?

The ECU interface is designed for anyone wishing to read vehicle or drive train sensor data directly from their ECU, without the need for additional sensors. Common parameters such as engine speed, coolant temperature, throttle position, etc, are normally available from the ECU, so no additional sensors would be required if using the ECU interface. This leaves the analogue input channels on your data logger free for connection to more specialised sensors, not normally monitored by your ECU (eg: suspension travel). ECUs are being added to the compatibility list all the time. Please contact Race Technology to confirm compatibility with your ECU.

Key Features

• Compatible with Race Technology displays and data loggers as stand alone units, or as part of a data logger and display system

• CAN and serial models available, compatible with a wide range of ECUs

• Receive data from existing vehicle sensors via your ECU - no need to add additional sensors for data logging

• All channels from the ECU are in addition to the channels already provided with the Race Technology data logger/display

• The serial interface is available for a wide range of popular ECUs, with further models being added all the time

• Upgradeable firmware. Both the CAN and serial interfaces are flash upgradeable with firmware updates

• Inline electronics encased in a tough injection moulded case
  

• Supplied with cables, instruction manual and comprehensive software CD

Compatible ECUs

The interface is compatible with a wide range of aftermarket ECUs.  It is generally not possible to use this interface with a vehicle manufacturer's original equipment ECU because these units do not normally have data output.  If you wish to read data from an original equipment ECU please refer to our CAN and Serial OBD interfaces. 

A list of compatible ECUs for the serial interface follows:

For more detailed information on compatible firmware versions and the available channels please consult our knowledge base by clicking here.

The relevant ECU type can then be selected from the menu on the left.  When ordering a serial interface please be sure to include your contact details with the order, so we may contact you to confirm the exact model required.  Alternatively please contact Race Technology for the very latest compatibility list.