|

(0)

|

|

|

|

Racing » Products » ECU interfaces » Serial interface

ECU interface - Serial

What is the ECU interface?

The Race Technology ECU interface is a small in-line module for use with a DASH1 or DASH2 display, a DL1 or DL2 data logger or any combination of data logger plus display, to allow data from your engine management system to be displayed and recorded.

Who is the ECU interface designed for?

The ECU interface is designed for anyone wishing to read vehicle or drive train sensor data directly from their ECU, without the need for additional sensors. Common parameters such as engine speed, coolant temperature, throttle position, etc, are normally available from the ECU, so no additional sensors would be required if using the ECU interface. This leaves the analogue input channels on your data logger free for connection to more specialised sensors, not normally monitored by your ECU (eg: suspension travel). ECUs are being added to the compatibility list all the time. Please contact Race Technology to confirm compatibility with your ECU.

Key Features

• Compatible with Race Technology displays and data loggers as stand alone units, or as part or a data logger and display system
• Compatible with a wide range of ECUs
• Receive data from existing vehicle sensors via your ECU - no need to add additional sensors for data logging
  All channels from ECU are in addition to the channels already provided with the Race Technology data logger/display
• Serial interface is reprogrammable for a wide range of popular ECUs, with further models being added all the time
• Upgradeable firmware. Both the CAN and serial interfaces are flash upgradeable with firmware updates
• Robust CNC machined aluminium enclosure (3.5 cm x 2.5 cm x 1 cm) with potted electronics
• Supplied with cables, instruction manual and comprehensive software CD

Compatibility

See our online Knowlege Base for compatibility information and channel availability on each ECU.  If your ECU is not on the list, please contact Race Technology.  These are for aftermarket ECUs with a serial output.  For aftermarket ECUs with a CAN output see our CAN interface, for production vehicles 1996 and later see our OBD2 interfaces.

A list of compatible ECUs for the serial interface follows:

• AEM

• Autronic SMC v1.91, 1.92, 1.99

• Autronic SM2 v1.91, 1.92, 1.94, 1.99

• Autronic SM2 v1.93 and v1.95

• Autronic SM4 up to v1.07

• Autronic SM4 v1.08

• Autronic SM4 v1.09

• DTA P8 Pro

• Electromotive TEC3

• EMERALD K3

• EMS Stinger and 8860

• HONDATA K-SERIES

• HYDRA 2.60

• KMS ECU

• MBE 941

• MBE 967

• Motec M4

• Motec M800

• OMEX 100

• OMEX 500

• OMEX 600

• OMEX 710

• Pectel

• Tatech v0.5

• VEMS