Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

DASH1 / TechnicalSpecification

Specification

Display40 Character, backlit display, character height 9.85mm
Controls4, 15mm buttons embedded into custom made front panel
Power Supply Requirements12v nominal input, minimum of 10v, maximum of 15v. Current consumption of about 180mA.
Case ConstructionCNC machined aluminium.
Connector TypeVery high reliability, IP65 9 way d-type
Main Processor40MHz RISC with embedded flash program memory
Serial PortFixed at a baud rate of 115200 baud for receiving information the standardised serial stream from our data logging products. Also used for re flashing, diagnostics and configuration.
VibrationFactory tested at 25g, 50Hz sinusoid for 5 minutes (without compact flash card inserted). Design tested to 25g in 3 axis for 24 hours.
TemperatureFactory tested from -20oC to 70oC
Page last modified on July 10, 2014, at 10:07 AM